1. |
Disconnect the negative (-) battery cable.
|
2. |
Remove the air cleaner assembly and air duct.
(Refer to Engine Mechanical System - "Air cleaner")
|
3. |
Remove the under cover (A).
|
4. |
Replace new gasket and the plug after draining the automatic transaxle
fluid by removing the drain plug.
(Refer to Hydraulic System - "Fluid")
|
5. |
Remove the valve body cover (A) and eyebolt (B).
|
6. |
Remove the bolt (3ea) after disconnecting the solenoid valve connector
(B) and the oil temperature sensor connector (A).
|
7. |
Remove the solenoid valve (B) after removing the solenoid support
(A).
|
Line Pressure Control Solenoid Valve Circuit Diagram
...
Drive Belt Tensioner Components
1. Alternator brace
2. Adjust nut
...
Knock Sensor (KS) Installation
•
Install the component with the specified torques.
•
...