Kia Forte: Start/Stop Button Removal
Second generation YD (2014-2018) / Kia Forte TD 2014-2018 Service Manual / Body Electrical System / Button Engine Start System / Start/Stop Button Removal
| 1. |
Disconnect the negative (-) battery terminal.
|
| 2. |
Using a screwdriver or remover, remove the center garnish [LH]
(A).
|
| 3. |
Using a screwdriver or remover, remove the cluster fascia panel
(A).
|
| 4. |
Remove the start/stop button (A) after loosening the screws from
the cluster fascia panel.
|
Start/Stop Button Installation
1.
Install the start/stop button.
2.
Connect the start/stop button connector.
3.
Install the cluster fascia pan ...
See also:
Components Location
1. Oil filler plug
2. Oil drain plug
...
Rear Package Tray Trim Replacement
(4Door)
•
Put on gloves to protect your hands.
...
Using the usb device
To use an external USB device, make sure the device is not connected when
starting up the vehicle. Connect the device after starting up.
If you start the engine when the USB device is connected ...
Copyright © www.kifomanual.com 2014-2024