Kia Forte: Starter Removal
Second generation YD (2014-2018) / Kia Forte TD 2014-2018 Service Manual / Engine Electrical System / Starting System / Starter Removal
| 1. |
Disconnect the battery negative terminal.
|
| 2. |
Remove the air duct and air cleaner assembly.
(Refer to Engine Mechanical System - "Air Cleaner")
|
| 3. |
Disconnect the starter cable (A) from the B terminal on the solenoid
then disconnect the connector from the S terminal (B).
|
| 4. |
Remove the 2 bolts holding the starter, then remove the starter
(A).
|
Starter Installation
1.
Install in the reverse order of removal.
Starter installation bolt:
49.0 ~ 63.7 N.m (5.0 ~ 6.5 kgf.m, 36.2 ~ 47.0 lb-ft)
...
See also:
Valve Body Components Location
1. Pressure Controle Valve(PCV) adjust screw
2. Solenoid valve
3. Oil temperature sensor
4. Accumulator
5. Low & Reverse Brake(LR/B) pressure flow hole
6. Underdrive ...
Components Location
Supplemental Restraint System Control
Module (SRSCM)
Driver Airbag (DAB) / Passenger Airbag
(PAB)
Side Airbag (SAB)
Curtain Airbag (CA ...
Removal
1.
Turn ignition switch OFF and disconnect the negative (-) battery
cable.
2.
Remove the battery (A) and ECM (B).
...
Copyright © www.kifomanual.com 2014-2024