1. |
Disconnect the battery negative (-) cable.
|
2. |
Remove the air duct and air cleaner assembly.
(Refer to Engine Mechanical System - "Engine And Transaxle Assembly")
|
3. |
Disconnect the starter cable (A) from the B terminal on the solenoid
then disconnect the connector (B) from the S terminal.
|
4. |
Remove the 2 bolts holding the starter, then remove the starter
(A).
|
Cylinder Head Installation
•
Thoroughly clean all parts to be assembled.
•
...
Removal
•
Removal of the airbag must be performed according to the
precautions/ procedures descr ...
Installation
1.
Install in the reverse order of removal.
A.
...