Kia Forte: Steering Column and Shaft Disassembly
Second generation YD (2014-2018) / Kia Forte TD 2014-2018 Service Manual / Steering System / Electric Power Steering / Steering Column and Shaft Disassembly
Universal joint assembly
| 1. |
Loosen the bolt (A) and then disconnect the universal joint assembly
from the steering column assembly.
|
| 2. |
Reassembly is the reverse of the disassembly.
|
Key lock assembly
| 1. |
Make a groove on the head of special bolts (A) by a punch.
|
| 2. |
Loosen the special bolt using a screw driver and then remove the
key lock assembly from the steering column assembly.
|
| 3. |
Reassembly is the reverse of the disassembly.
|
Steering Column and Shaft Replacement
1.
Remove the steering wheel.
(Refer to Steering System - "Steering Wheel")
2.
Remove the steering column shroud.
(Ref ...
Steering Column and Shaft Inspection
1.
Check the steering column for damage and deformation.
2.
Check the joint bearing for damage and wear.
3.
Che ...
See also:
Filter replacement
It must be replaced when necessary, and should not be washed.
You can clean the filter when inspecting the air cleaner element.
Clean the filter by using compressed air.
1. Loosen the air c ...
Transaxle Oil Temperature Sensor Description
Transaxle Oil Temperature Sensor(OTS) monitors the automatic transaxle
fluid's temperature and conveys the readings to Transaxle Control Module(TCM).
It is an Negativen Thermal Coefficien ...
Component Location
1. Driver power window main switch
2. Passenger power window switch
3. Front window motor
4. Rear window motor
5. Rear window switch
...
Copyright © www.kifomanual.com 2014-2024