1. |
Open the glass fully.
|
2. |
Remove the mounting pins (C), from the frame (B), and then remove
the deflector (A).
|
3. |
Install in the reverse order of removal.
|
Injector Installation
•
Install the component with the specified torques.
•
...
Components
1. Control shaft complete
2. Back-up lamp switch
3. Vehicle speed sensor
4. Transaxle housing
5. Transaxle case
...
Purge Control Solenoid Valve (PCSV) Inspection
1.
Turn the ignition switch OFF.
2.
Disconnect the PCSV connector.
3.
Measure resistance between the PCSV termi ...