(5Door) |
|
1. |
After loosening the mounting bolts, then remove the tail gate
latch assembly (A).
|
2. |
Disconnect the tail gate latch connector (A).
|
3. |
Install in the reverse order of removal.
|
Drive Belt Tensioner Inspection
Check the belt tensioner for excessive foreign substances, crack, damage
or sticking of pivot shaft. Replace if necessary. ...
Ambient Temperature Sensor Replacement
1.
Disconnect the negative (-) battery terminal.
2.
Remove the engine room under cover front panel (A).
3.
...
Removal
1.
Disconnect the negative (-) battery terminal.
2.
Remove the steering wheel.
(Refer to Steering System - "Steering Wheel")
...