Kia Forte: Tail Gate Lift Replacement
•
|
Take care to not let the tailgate fall on you as the lifts
are removed. Have a helper hold the tailgate open, or use a
secure method to hold it open.
|
|
1. |
Loosen the tail gate lifter mounting bolts.
|
2. |
Using a screwdriver, lift the socket clips (A) up slightly on
both ends of the tail gate lifter (B).
Tightening torque :
6.9 ~ 10.8 N.m (0.7 ~ 1.1 kgf.m, 5.1 ~ 8.0 lb-ft)
|
|
3. |
Push the socket of the lifter into the bracket for installation.
• |
Make sure the tail gate locks and opens properly
and locks securely.
|
|
|
(5Door)
•
When prying with a flat-tip screwdriver, wrap it with
protective ...
(5Door)
1.
Remove the tail gate weatherstrip (A).
...
See also:
Front Body
Front Body A
* These dimensions indicated in this figure are
actual-measurement dimensions. [ Unit : mm (inch) ]
Front Body B
* These dimensions indicated in th ...
Cigarette lighter (if equipped)
For the cigarette lighter to work, the ignition switch must be in the ACC or
ON position.
To use the cigarette lighter, push it all the way into its socket. When the element
is heated, the ligh ...
IMS Control Switch Circuit diagram
...