Kia Forte: Telemetics Unit (TMU) Removal
Second generation YD (2014-2018) / Kia Forte TD 2014-2018 Service Manual / Body Electrical System / MTS System / Telemetics Unit (TMU) Removal
| 1. |
Disconnect the negative (-) battery terminal.
|
| 2. |
Remove the glove box housing.
(Refer to Body - "Glove Box Housing")
|
| 3. |
Disconnect the cable (A) and connector (B), then remove the MTS
unit (C) after loosening the mounting bolts.
|
Telemetics Unit (TMU) Component
Connector Pin Specification
No.
Pin Name
Type
From
To
Description (Wiring
Spec.)
1
GND
DC Ground
TMU
Batt ...
Telemetics Unit (TMU) Installation
1.
Install the MTS unit after connecting the cable and connector.
2.
Install the glove box housing.
3.
Connect ...
See also:
Engine Coolant Temperature Sensor (ECTS) Description
Engine Coolant Temperature Sensor (ECTS) is located in the engine coolant
passage of the cylinder head for detecting the engine coolant temperature. The
ECTS uses a thermistor whose resistanc ...
Rear Bumper Cover Replacement
(4Door)
•
Put on gloves to protect your hands.
...
Start/Stop Button Removal
1.
Disconnect the negative (-) battery terminal.
2.
Using a screwdriver or remover, remove the center garnish [LH]
(A).
...
Copyright © www.kifomanual.com 2014-2024