[Driver's side] |
1. |
Disconnect the negative (-) battery terminal.
|
2. |
Remove the crash pad lower panel.
(Refer to Body -"Crash Pad Lower Panel")
|
3. |
Remove the driver's side shower duct by loosening the screw.
|
4. |
Disconnect the connector (A) and then remove the temperature control
actuator (B) after loosening the mounting screws.
|
5. |
Install in the reverse order of removal.
|
[Passenger's side] |
1. |
Disconnect the negative (-) battery terminal.
|
2. |
Remove the glove box housing.
(Refer to Body -"Glove Box Housing")
|
3. |
Remove the passenger's side shower duct by loosening the screw.
|
4. |
Disconnect the connector (A) and then remove the temperature control
actuator (B) after loosening the mounting screws.
|
5. |
Install in the reverse order of removal.
|
Tightening Torques
Items
N.m
kgf.m
lb-ft
Oil drain plug
58.9 ~ 78.5
6.0 ~ 8.0
43.4 ~ 57.8
Oil filler plug
58.9 ~ 78.5
6.0 ~ 8.0
...
Compressor Installation
1.
Make sure the compressor mounting bolt with the correct length
is screwed in. Tighten the mounting bolts (A) with the specified tightening
order.
...
Trip A/B
Tripmeter (1)
The tripmeter is the total driving distance since the last tripmeter reset.
Distance range: 0.0 ~ 9999.9 mi. or km
To reset the tripmeter, press the RESET button (Type A : RESET, ...