|
1. |
Remove the Front Driveshaft.
(Refer to Driveshaft Assembly - “Front Driveshaft”)
|
2. |
Remove the circlip (B) from the driveshaft spline (A).
|
3. |
Remove both boot bands from the TJ case.
|
4. |
Remove the TJ case (A).
|
5. |
Remove the snap ring (A) from the shaft.
|
6. |
Remove the spider assembly (B) from the driveshaft (A) using the
special tool (09495-33000).
|
7. |
Clean the spider assembly.
|
8. |
Remove the TJ boot (A).
|
Auto Light Sensor Removal
1.
Disconnect the negative (-) battery terminal.
2.
Remove the auto light sensor (A) from crash pad upper side by
using screw (-) driver.
...
Front Door Side Weatherstrip Replacement
(4Door, 5Door)
1.
Loosen the front door checker (B) mounting bolt.
Tightening torque:
16.7 ~ 25.5 N.m (1.7 ~ 2.6 kgf.m, 12.3 ...
Underdrive Brake Control Solenoid Valve(UD/B_VFS) Circuit Diagram
...