1. |
Disconnect the negative (-) battery cable.
|
2. |
Remove the air cleaner assembly and air duct.
(Refer to Engine Mechanical System - "Air cleaner")
|
3. |
Remove the under cover (A).
|
4. |
Replace new gasket and the plug after draining the automatic transaxle
fluid by removing the drain plug.
(Refer to Hydraulic System - "Fluid")
|
5. |
Remove the air breeder hose (A).
|
6. |
Remove the valve body cover (B).
|
7. |
Remove the bolt (3ea) after disconnecting the solenoid valve connector
(B) and the oil temperature sensor connector (A).
|
8. |
Remove the solenoid valve support bracket (B) and the valve body
mounting bolt (A-1ea).
|
9. |
Remove the torque converter control solenoid valve (A).
|
Rear Back Armrest Component Location
1. Rear back armrest
...
Sunroof Glass Component Location
1. Sunroof glass
...
Rearview camera
The rear view camera will activate with the ignition switch on and the shift
lever in the R (Reverse) position.
Note- during initial start up, system may not display instantly due to the audio
...