Kia Forte: TPMS Receiver
1. |
Mode
(1) |
Virgin State
A. |
The receiver as a sole part is shipped in this
state. Replacement parts should therefore arrive in
this state.
|
B. |
In this state, there is no sensor monitoring and
no DTC monitoring.
|
C. |
The state indicates that platform specific parameters
must be written to the receiver and that sensors are
un-learned.
|
|
(2) |
Normal State
A. |
In order for tire inflation state and DTC monitoring
to occur, the receiver must be in this state.
|
B. |
In this state, automatic sensor learning is enabled.
|
|
(3) |
Test State
A. |
This state is only used in manufacturing plant
to check RF transmission between sensor and receiver.
|
|
|
2. |
Overview
A. |
Receives RF data from sensor.
|
B. |
Uses sensor data to decide whether to turn on TREAD Lamp.
|
C. |
Learn TPM sensor for under inflation monitoring automatically.
|
D. |
Uses sensor information, distance travelled, background
noise levels, Auto-learn status, short / open circuit output
status, vehicle battery level, internal receiver states to determine
if there is a system or a vehicle fault.
|
|
As manual for diagnosis methods by using diagnosis device, the main contents
are as follows:
1.
Connect self-diagnosis connector(16pins) located in the lower
of driv ...
1.
General Function
A.
Auto-learn takes place only once per Ignition cycle.
B.
On successful compl ...
See also:
Shift Cable Adjustment
1.
Place the shift lever in the interior, and the transmission manual
control lever, to the N position.
2.
Connect the shift lever (B) in ...
Replacement
(4Door, 2Door)
[Removal]
•
Put on gloves to protect your hands.
...
Description
The ECM (Electro Chromatic inside rear view Mirror) is for dimming the
reflecting light from a vehicle behind at night, Preventing glare from the light.
The forward facing sensor detects brig ...