1. |
Disconnect the negative (-) battery cable.
|
2. |
Remove the air cleaner assembly and air duct.
(Refer to Engine Mechanical System - "Air cleaner")
|
3. |
Remove the under cover (A).
|
4. |
Replace new gasket and the plug after draining the automatic transaxle
fluid by removing the drain plug.
(Refer to Hydraulic System - "Fluid")
|
5. |
Remove the air breather hose (A).
|
6. |
Remove the valve body cover (B).
|
7. |
Disconnect the oil temperature sensor connector (A).
|
8. |
Remove the oil temperature sensor (A) after removing a bolt.
|
DC/DC Converter Installation
1.
Install in the reverse order of removal.
If the battery negative (-) c ...
Photo Sensor Description
The photo sensor is located at the center of the defrost nozzle.
The photo sensor contains a photovoltaic (sensitive to sunlight) diode.
The solar radiation received by its light receiving p ...
Tightening Torques
Engine Control System
Item
kgf.m
N.m
lb-ft
ECM installation bolt
0.8 ~ 1.2
7.8 ~ 11.8
5.8 ~ 8.7
ECM bracket ins ...