Kia Forte: Variable Charge Motion Actuator (VCMA) Description

The Variable Charge Motion Actuator (VCMA) is installed on the inlet of the intake manifold.

It consists of a DC motor which actuates the VCM valve and a position sensor which detects the position of the VCM valve.

The VCM system tumbles air flow entering into combustion chamber of each cylinder by closing the VCM valve in the cold start conditions.

This tumble effect reduces cold start emissions by improving atomization

Canister Close Valve (CCV) Installation

   • Install the component with the specified torques. • ...

Variable Charge Motion Actuator (VCMA) Components

1. Coupling 2. Shaft 3. Stabilizer O-ring 4. Stabilizer 5. O-ring 6. Insert nut 7. Stabilizer Cover 8. Valve 9. Hole cover ...

See also:

Line Pressure Control Solenoid Valve Specifications
Direct control VFS[Line Pressure] ▷ Control type : Normal high type Control Pressure kpa (kgf/cm², psi) 500.14 ~ 9.81 (5.1 ~ 0.1,72.54 ~ 1.42) Current val ...

Front Seat Shield Inner Cover Replacement
   • Put on gloves to protect your hands. &n ...

SS-B Solenoid Valve(ON/OFF) Removal
1. Disconnect the negative (-) battery cable. 2. Remove the air cleaner assembly and air duct. (Refer to Engine Mechanical System - &qu ...