Kia Forte: Water pump Components

Water Temperature Control Assembly Removal and Installation

1. Remove the engine cover. 2. Drain the engine coolant. (Refer to Cooling System - "Coolant") 3. ...

Water pump Removal and Installation

1. Loosen the drain plug, and then drain the engine coolant. Remove the radiator cap to help drain the coolant faster. 2. Remove the drive ...

See also:

Adjustment
Concentric Slave Cylinder Air Bleeding Procedure 1. After disconnecting a cap from the concentric slave cylinder air bleeder, insert a vinyl hose in the pl ...

Steering Angle Sensor
The Steering Angle Sensor (SAS) is installed in MDPS (Motor Driven Power Steering) and it sends messages to HECU through CAN communication line. The SAS is used to determine turning directio ...

Removal
   Handle the sensor with care. 1. Remove the tire. (Refer to Tire/Wheels - "Tire& ...