1. |
Loosen the drain plug, and then drain the engine coolant. Remove
the radiator cap to help drain the coolant faster.
|
2. |
Remove the drive belt.
(Refer to Timing System – “Drive Belt”)
|
3. |
Remove the water pump pulley (A).
|
4. |
Remove the water pump assembly (A) with the gasket (B).
|
5. |
Install in the reverse order of removal.
|
6. |
Fill the engine coolant.
|
7. |
Start the engine and check for leaks.
|
8. |
Recheck the coolant level.
|
Hood Latch Replacement
1.
Disconnect the hood latch connector (A).
2.
Remove the hood latch assembly (A) mounting bolts.
Tightening ...
CVVT & Camshaft Description
Continuous Variable Valve Timing (CVVT) system advances or retards the
valve timing of the intake and exhaust valve in accordance with the ECM control
signal which is calculated by the engine ...
Power Door Lock Switch Installation
1.
Install the power window switch.
2.
Connect the connector and install the front door trim.
...