Kia Forte: What to do in an emergency

Certification label

The certification label is located on the driver's door sill at the center pillar. This label shows the maximum allowable weight of the fully loaded vehicle. This is called the GVWR (Gross V ...

Road warning

...

See also:

CVVT & Camshaft Inspection
Camshaft 1. Inspect the cam lobes. Using a micrometer, measure the cam lobe height. If the cam lobe height is less than specification, replace the camsh ...

Oil Pump Unit (OPU) Circuit diagram
...

Intake Air Temperature Sensor (IATS) Inspection
1. Turn the ignition switch OFF. 2. Disconnect the IATS connector. 3. Measure resistance between the IATS termi ...