Kia Forte: Ambient Temperature Sensor Inspection
Second generation YD (2014-2018) / Kia Forte TD 2014-2018 Service Manual / Heating,Ventilation, Air Conditioning / Air Conditioning System / Ambient Temperature Sensor Inspection
| 1. |
Turn the ignition switch OFF.
|
| 2. |
Disconnect ambient temperature sensor.
|
| 3. |
Check the resistance of the ambient temperature sensor between
terminals 1 and 2 whether it changes by changing the ambient temperature.
Specification
|
| 4. |
If the measured resistance is not within specification, substitute
with a known-good ambient temperature sensor and check for proper operation.
|
| 5. |
Replace the ambient temperature sensor if it is proved that there
is a problem with it.
|
Ambient Temperature Sensor Description
The ambient temperature sensor is located at the front of the condenser
and detects ambient air temperature. It is a negative type thermistor; resistance
will increase with lower temperature, ...
Ambient Temperature Sensor Replacement
1.
Disconnect the negative (-) battery terminal.
2.
Remove the engine room under cover front panel (A).
3.
...
See also:
Components Location
1. Engine Control Module (ECM)
2. Manifold Absolute Pressure Sensor (MAPS)
3. Intake Air Temperature Sensor (IATS)
4. Engine Coolant Temperature Sensor (ECTS)
5. Throttle Positi ...
Blade inspection
Commercial hot waxes applied by automatic car washes have been known to make
the windshield difficult to clean.
Contamination of either the windshield or the wiper blades with foreign matter
ca ...
Component Location
1. Hood switch
2. Burglar horn
3. BCM and RF antenna
4. Key warning switch
5. Front door switch
6. Front door lock actuator & switch
7. Rear door lock actuator &am ...
Copyright © www.kifomanual.com 2014-2025