Component Location
[Engine Room]
1. Receiver Drier
2. Condenser
3. Ambient Temperature Sensor
4. Compressor
5. Discharge Hose
6. Suction & Liquid Tube Assembly
7. Servic ...
Receiver-Drier Replacement
1.
Remove the condenser, and then remove the bottom cap (B) with
a L wrench (A) from the condenser.
Tightening torque :
9.8~14.7N.m ( ...
Audio Remote Control Installation
1.
Reassemble the steering wheel remote control switch after connecting
the connector.
2.
Reassemble the driver airbag module.
...