Kia Forte: Controller

Intake Actuator Replacement

1. Disconnect the negative (-) battery terminal. 2. Remove the glove box housing. (Refer to Body -"Glove Box Housing") ...

Heater & A/C Control Unit (Manual) Components

Connector Pin Function Connector No. Description Connector No. Description A 1 Ground B 14 In ...

See also:

Variable Charge Motion Actuator (VCMA) Removal
1. Turn the ignition switch OFF and disconnect the battery negative (-) cable. 2. Disconnect the VCMA connector (A). ...

Water pump Removal and Installation
1. Loosen the drain plug, and then drain the engine coolant. Remove the radiator cap to help drain the coolant faster. 2. Remove the drive ...

Overhead Console Lamp Installation
1. Install the overhead console lamp after connecting the sunroof switch connector and lamp connector. 2. Install the lens after tightening ...