1. |
Remove the audio unit.
(Refer to Body Electrical System - "Audio Unit")
|
2. |
After loosening the mounting screws, remove the A/C & heater controller
(A).
|
3. |
Disconnect the A/C & heater controller connector (A).
|
4. |
Install in the reverse order of removal.
|
Crash Pad Side Cover Component Location
[LH]
1. Crash pad side cover [LH]
[RH]
1. Crash pad side cover [RH]
...
Alternator Circuit Diagram
•
COM signal - When
controlling the voltage generated, the ECM sends the target
...
Mode Control Actuator Inspection
1.
Turn the ignition switch OFF.
2.
Disconnect the mode control actuator connector.
3.
Verify that the mode con ...