Kia Forte: Body Panel Gaps

Front Cross Member

* These dimensions indicated in this figure are actual-measurement dimensions. [ Unit : mm (inch) ] ...

Fender

...

See also:

Exhaust Manifold Removal and Installation
1. Remove the engine cover. 2. Disconnect the battery negative terminal. 3. Disconnect the front and rear oxyge ...

Manifold Absolute Pressure Sensor (MAPS) Installation
   • Install the component with the specified torques. • ...

Checking the brake/clutch  fluid level
Check the fluid level in the reservoir periodically. The fluid level should be between MAX and MIN marks on the side of the reservoir. Before removing the reservoir cap and adding brake/clutch* ...