Kia Forte: Canister Close Valve (CCV) Description

Canister Close Valve (CCV) is normally open and is installed on the canister ventilation line. It seals evaporative emission control system by shutting the canister from the atmosphere during EVAP leak detection process.

Variable Intake Solenoid (VIS) Valve Installation

   • Install the component with the specified torques. • ...

Canister Close Valve (CCV) Specification

Item Specification Coil Resistance (Ω) 19.5 ~ 22.5 [20°C(68°F) ...

See also:

Fuel Tank Pressure Sensor (FTPS) Removal
1. Turn the ignition switch OFF and disconnect the battery negative (-) cable. 2. Remove the rear seat. (Refer to Body - “Rear Se ...

Knock Sensor (KS) Description
Knocking is a phenomenon characterized by undesirable vibration and noise and can cause engine damage. Knock Sensor (KS) is installed on the cylinder block and senses engine knocking. Whe ...

Engine Control Module (ECM) Removal
   When replacing the ECM, the vehicle equipped with the immobilizer must be performed procedure as below. ...