Kia Forte: Canister Inspection
| 1. |
Check for the following items visually.
- Cracks or leakage of the canister
- Loose connection, distortion, or damage of the vapor hose/tube
A: Canister ↔ Atmosphere
B: Canister ↔ Intake Manifold
C: Canister ↔ Fuel Tank
|
Canister Removal
[LEV2 Type]
1.
Lift the vehicle.
2.
Disconnect the vapor hose quick-connector (A) and ventilation
hose (B).
...
Canister Installation
1.
Installation is the reverse of removal.
Canister installation bolt/nut:
19.6 ~ 29.4 N.m (2.0 ~ 3.0 kgf.m, 14.5 ~ 21.7 lb-ft)
...
See also:
Rear Body
* These dimensions indicated in this figure are
actual-measurement dimensions. [ Unit : mm (inch) ]
Side outer p ...
Inspection
Component Inspection
1.
Remove the clutch switch.
(Refer to Clutch Switch - "Removal")
2.
Push the clutch switch in the di ...
Temperature Control Actuator Description
The heater unit includes mode control actuator and temperature control
actuator.
The temperature control actuator is located at the heater unit. It regulates
the temperature by the proced ...
Copyright © www.kifomanual.com 2014-2025