Kia Forte: Cooling Fan Specifications - Cooling System - Engine Mechanical System - Kia Forte TD 2014-2018 Service ManualKia Forte: Cooling Fan Specifications

Second generation YD (2014-2018) / Kia Forte TD 2014-2018 Service Manual / Engine Mechanical System / Cooling System / Cooling Fan Specifications

Item
Specification
Fan type
PULLER
Fan speed control
Resistor (HI-LOW-OFF)
Air flow rate [㎥/h (yd³/h)]
1,700 (2,224) -10% min.
Fan speed (rpm)
1,850 ±10%
Current (A)
10.0 +10% max.

Cooling Fan Description
[Air conditioning type] The cooling fan operates in 2 stages (HIGH/LOW). The engine control module (ECM) controls the cooling fan according to the coolant temperature, vehicle speed and A ...

Cooling Fan Circuit Diagram
...

See also:

Front Pillar Trim Component Location
1. Front pillar trim ...

Purge Control Solenoid Valve (PCSV) Description
Purge Control Solenoid Valve (PCSV) is installed on the intake manifold and controls the evaporative purge between the canister and the intake manifold. It is a normally closed solenoid valve ...

Components
1. ESC Control Module (HECU) 2. Front Wheel Speed Sensor 3. Rear Wheel Speed Sensor 4. Yaw-late & Lateral G Sensor 5. Steering Wheel Angle Sensor 6. ABS Warning Lamp ...

Copyright www.kifomanual.com 2014-2026