Kia Forte: Installation

1.	Install in the reverse order of removal.

2.	Compress the piston into the caliper body using the SST(09581-11000).

3.	After installation, bleed the brake system. (Refer to Brake system bleeding)

•	Do not hit piston end by hammer or prying directly against piston face with screwdriver to push in piston.

•	Using wood or used pad to protect piston end and pushing the wood or pad is recommended.

•	When spreading a piston, SST should be cover all area of piston end face.

Front brake disc thickness check 1. Check the brake pads for wear and fade. 2. Check the brake disc for damage and cracks. ...

Components 1. Guide rod bolt 2. Bleed screw 3. Caliper carrier 4. Caliper body 5. Brake pad 6. Pad retainer ...

Categories