(5Door) |
1. |
After loosening the tail gate hinge (A) mounting bolt, adjust
the tail gate by moving it up or down, or right or left.
|
2. |
Adjust the tail gate height by turning the tail gate overslam
bumpers (B).
|
3. |
After loosening the tail gate striker (C) mounting bolts, adjust
the tail gate striker by moving it up or down, or right or left.
|
Drive Belt Tensioner Inspection
Check the belt tensioner for excessive foreign substances, crack, damage
or sticking of pivot shaft. Replace if necessary. ...
Front Mud Guard Replacement
•
Put on gloves to protect your hands.
&nb ...
Canister Close Valve (CCV) Inspection
1.
Turn the ignition switch OFF.
2.
Disconnect the CCV connector.
3.
Measure resistance between the CCV termina ...