Kia Forte: Cluster Ionizer Replacement
Second generation YD (2014-2018) / Kia Forte TD 2014-2018 Service Manual / Heating,Ventilation, Air Conditioning / Air Conditioning System / Cluster Ionizer Replacement
| 1. |
Disconnect the negative (-) battery terminal.
|
| 2. |
Remove the glove box housing.
(Refer to Body -"Glove Box Housing")
|
| 3. |
Disconnect the cluster ionizer connector (A).
|
| 4. |
Remove the screws and then remove the cluster ionizer (B).
|
| 5. |
Install in the reverse order of removal.
|
Cluster Ionizer Inspection
1.
Press the MODE switch more then 4 times within 2 seconds while
pressing the OFF switch.
Display
Fail description
00 ...
Heater
...
See also:
Engine overheat
If your temperature gauge indicates overheating, you will experience a loss of
power, or hear loud pinging or knocking, the engine is probably too hot. If this
happens, you should: 1.Pull off the ro ...
Multimedia Jack Circuit Diagram
...
Installation
Pressure Side Impact Sensor
1.
Install the new pressure side impact sensor with the screws (B)
then connect the pressure side impact sensor connector (A).
...
Copyright © www.kifomanual.com 2014-2025