(4Door, 5Door) |
1. |
Pull down rear door window glass by pressing the power window
glass switch.
|
2. |
After loosening the mounting screws, then remove the rear door
belt outside weatherstrip (A).
|
3. |
Install in the reverse order of removal.
|
Removal
1.
Turn ignition switch OFF and disconnect the negative (-) battery
cable.
2.
Remove the crash pad lower panel.
(Refer to Body - & ...
Drive Belt Tensioner Removal and Installation
1.
Remove the drive belt.
(Refer to Timing System - "Drive Belt")
2.
Remove the alternator lower bolt (A).
...
35R Clutch Control Solenoid Valve(35R/C_VFS) Removal
Replacing an on/off solenoid valve (SS-A, SS-B) does not require
additional hydraulic pressure adjustment; however, the ...