Kia Forte: Rear Door Belt Inside Weatherstrip Replacement
Second generation YD (2014-2018) / Kia Forte TD 2014-2018 Service Manual / Body (Interior and Exterior) / Rear Door / Rear Door Belt Inside Weatherstrip Replacement
| (4Door, 5Door) |
| 1. |
Remove the rear door trim.
(Refer to Rear Door - "Rear Door Trim")
|
| 2. |
Remove the rear door belt inside weatherstrip (A).
|
| 3. |
Install in the reverse order of removal.
|
Rear Door Belt Outside Weatherstrip Replacement
(4Door, 5Door)
1.
Pull down rear door window glass by pressing the power window
glass switch.
2.
After loosening the mounting ...
Rear Door Side Weatherstrip Replacement
(4Door, 5Door)
1.
Loosen the rear door checker (B) mounting bolt.
Tightening torque:
16.7 ~ 25.5 N.m (1.7 ~ 2.6 kgf.m,12.3 ~ ...
See also:
Installation
1.
Install in the reverse order of removal.
2.
Tighten the vacuum pump mounting bolts to the specified torque.
...
Components
1. ESC Control Module (HECU)
2. Front Wheel Speed Sensor
3. Rear Wheel Speed Sensor
4. Yaw-late & Lateral G Sensor
5. Steering Wheel Angle Sensor
6. ABS Warning Lamp
...
AGM Battery Removal
1.
Disconnect the battery terminals (A).
(1)
Tightening torque
(+) terminal :
7. ...
Copyright © www.kifomanual.com 2014-2025