1. |
Disconnect the negative (-) battery terminal.
|
2. |
With a flat-head screwdriver, remove the photo sensor (A) from
the center of the defrost nozzle, and disconnect the connector (B).
|
3. |
Install in the reverse order of removal.
|
Component
1. Concentric slave cylinder assembly
2. Manual transaxle
...
Auto Light Sensor Inspection
In the state of IGN1 ON, when multifunction switch module detects auto
light switch on, tail lamp relay output and head lamp low relay output are controlled
according to auto light sensor' ...
ISG OFF Switch Inspection
1.
Remove the crash pad side switch assembly (A) from the switch
panel on the crach pad of the driver's side.
2.
Remove the ISG ...