Kia Forte: Auto Defogging Sensor Description - Air Conditioning System - Heating,Ventilation, Air Conditioning - Kia Forte TD 2014-2018 Service ManualKia Forte: Auto Defogging Sensor Description

Second generation YD (2014-2018) / Kia Forte TD 2014-2018 Service Manual / Heating,Ventilation, Air Conditioning / Air Conditioning System / Auto Defogging Sensor Description

The auto defogging sensor is installed on the front windshield glass. The auto defogging sensorr senses moisture on the windshild. The air conditioner control module receives the signal from the sensor and eliminate fog by controlling the intake actuator, A/C, auto defogging actuator, blower motor rpm, and mode actuator.

Photo Sensor Replacement
1. Disconnect the negative (-) battery terminal. 2. With a flat-head screwdriver, remove the photo sensor (A) from the center of the defros ...

Auto Defogging Sensor Replacement
1. Disconnect the negative (-) battery terminal. 2. Disconnect the sensor cover (A) and then remove the auto defogging sensor (B). ...

See also:

Components
1. Slide motor 2. Height motor 3. Recline motor 4. Power seat control switch 5. Recline control switch 6. Lumbar support switch 7. Lumbar support motor 8. Tilt moto ...

CVVT & Camshaft Installation
1. Install the CVVT assembly (A) to the camshaft. Tightening torque : 64.7 ~ 76.5 N.m (6.6 ~ 7.8 kgf.m, 47.7 ~ 56.4 lb-ft) ...

Removal
1. Remove the transaxle assembly. (Refer to Manual Transaxle System - " Manual Transaxle") 2. Remove the concentric slave cyl ...

Copyright © www.kifomanual.com 2014-2024