(4Door, 5Door) |
1. |
Pull down rear door window glass by pressing the power window
glass switch.
|
2. |
After loosening the mounting screws, then remove the rear door
belt outside weatherstrip (A).
|
3. |
Install in the reverse order of removal.
|
SS-A Solenoid Valve(ON/OFF) Inspection
1.
Turn ignition switch OFF.
2.
Disconnect the Solenoid valve connector.
3.
Measure resistance between sensor ...
Precautions
General Precautions
Please read the following precautions carefully before performing the
airbag system service.
Observe the instructions described in this manual, or the airba ...
TJ Joint Inspection
1.
Check the spider assembly for roller rotation, wear or corrosion.
2.
Check the groove inside the joint case for wear or corrosion
...