Kia Optima Manuals

Kia Forte: Rear Spoiler Replacement - Body Side Moulding - Body (Interior and Exterior) - Kia Forte TD 2014-2018 Service ManualKia Forte: Rear Spoiler Replacement

Second generation YD (2014-2018) / Kia Forte TD 2014-2018 Service Manual / Body (Interior and Exterior) / Body Side Moulding / Rear Spoiler Replacement

(5Door)
  
•
When prying with a flat-tip screwdriver, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage.
•
Put on gloves to protect your hands.
  
•
Take care not to scratch the body surface.
1.
Remove the tail gate upper trim.
(Refer to Tail Gate - "Tail Gate Trim")
2.
Disconnect the washer nozzle hose (A) and high mounted stop lamp connector (B).
3.
Remove the caps (A).
4.
Loosen the rear spoiler mounting nuts (B).
Tightening torque :
5.9 ~ 6.4 N.m (0.6 ~ 0.65 kgf.m, 4.3 ~ 4.7 lb-ft)

5.
Remove the rear spoiler (A).
6.
Install in the reverse order of removal.
  
•
Make sure the connector is connected properly.
•
Replace any damaged clips.
Rear Mud Guard Replacement
   • Put on gloves to protect your hands. &nb ...

Sunroof
...

See also:

High Mounted Stop Lamp Installation
[2 Door] 1. Install the high mounted stop lamp assembly. 2. Install the roof trim assembly. [4 Door] 1. ...

Front Impact Sensor (FIS)
The front impact sensor (FIS) is installed in the front side member. They are remote sensors that detect acceleration due to a collision at its mounting location. The primary purpose of the F ...

Specifications
Items Specifications Rated voltage DC 5V Load Max. 1mA (When head lamp lighting) Illuminations (LUX) 50 1.42 ± 0.31V ...

Categories


Copyright © www.kifomanual.com 2014-2025