Kia Forte: Rear Mud Guard Replacement
•
|
Put on gloves to protect your hands.
|
|
•
|
When prying with a flat-tip screwdriver, wrap it with
protective tape, and apply protective tape around the related
parts, to prevent damage.
|
•
|
Take care not to scratch the body surface.
|
|
1. |
After loosening the mounting clip and screws, then remove the
rear mud guard (A).

|
2. |
Install in the reverse order of removal.
• |
Replace any damaged clips.
|
|
|
•
Put on gloves to protect your hands.
&nb ...
(5Door)
•
When prying with a flat-tip screwdriver, wrap it with
protective ...
See also:
Auto Defogging Actuator Replacement
1.
Disconnect the negative (-) battery terminal.
2.
Remove the glove box housing.
(Refer to Body -"Glove Box Housing")
...
Oil Pump Unit (OPU) Inspection
OPU Problem Inspection Procedure
1.
TEST OPU GROUND CIRCUIT: Measure resistance between OPU and chassis
ground using the backside of OPU harness connector ...
Tail Gate Trim Replacement
(5Door)
[Tail gate upper trim]
•
When prying with a flat-tip screwdri ...