1. Glass panel assembly 2. Guide assembly 3. Drip rail assembly 4. Sunshade assembly 5. Deflector 6. Deflector link assembly 7. Sunroof frame assembly |
8. Motor assembly 9. Drip link 10. Spring base assembly 11. Set plate assembly 12. Stopper 13. Seal tape |
Positive Crankcase Ventilation (PCV) Valve Installation
1.
Installation is reverse of removal.
PCV Valve installation:
1.96 ~ 2.94 N.m (0.2 ~ 0.3 kgf.m, 1.45 ~ 2.17 lb-ft)
...
Description
Idle Stop & Go (ISG) function automatically switches off the engine when
the car is at a standstill if the and starts it again as soon as the brake pedal
is released. This not only reduce ...
Rear Hub - Carrier Replacement
1.
Loosen the wheel nuts slightly.
Raise the vehicle, and make sure it is securely supported.
2.
Remove the rear wheel and tire (A) from ...