Kia Forte: Steering Column Shroud Panel Replacement
[Steering column shroud lower panel]
| •
|
Put on gloves to protect your hands.
|
|
| •
|
When prying with a flat-tip screwdriver, wrap it with
protective tape, and apply protective tape around the related
parts, to prevent damage.
|
| •
|
Use a plastic panel removal tool to remove interior trim
pieces to protect from marring the surface.
|
| •
|
Take care not to bend or scratch the trim and panels.
|
|
|
1. |
Remove the crash pad lower panel.
(Refer to Crash Pad - "Crash Pad Lower Panel")
|
|
2. |
After loosening the mounting screws, then remove the steering
column shroud lower panel (A).
|
|
3. |
Install in the reverse order of removal.
|
• |
Replace any damaged clips.
|
|
|
[Steering column shroud upper panel]
| •
|
Put on gloves to protect your hands.
|
|
| •
|
When prying with a flat-tip screwdriver, wrap it with
protective tape, and apply protective tape around the related
parts, to prevent damage.
|
| •
|
Use a plastic panel removal tool to remove interior trim
pieces to protect from marring the surface.
|
| •
|
Take care not to bend or scratch the trim and panels.
|
|
|
1. |
Remove the cluster fascia panel.
(Refer to Crash Pad - "Cluster Fascia Panel")
|
|
2. |
Install in the reverse order of removal.
|
• |
Replace any damaged clips.
|
|
|
1. Steering column shroud lower panel
2. Steering column shroud upper panel
...
[LH]
1. Crash pad side cover [LH]
[RH]
1. Crash pad side cover [RH]
...
See also:
Description
TREAD Lamp
-
Tire Under Inflation / Leak Warning.
1.
Turn on condition
A.
When tire pressure is below a ...
Rear Seat Back Cover Component Location
(4Door, 2Door)
1. Rear seat back cover [LH]
2. Rear seat back cover [RH]
(5Door)
1. Rear seat back assembly [LH]
2. Rear seat ...
General Information
The supplemental restraint system (SRS) is designed to supplement the
seat belt to help reduce the risk or severity of injury to the driver and passenger
by activating and deploying the drive ...
Steering Column Shroud Panel Component Location
Crash Pad Side Cover Component Location