Kia Forte: Crash Pad Side Cover Replacement - Crash Pad - Body (Interior and Exterior) - Kia Forte TD 2014-2018 Service ManualKia Forte: Crash Pad Side Cover Replacement

Second generation YD (2014-2018) / Kia Forte TD 2014-2018 Service Manual / Body (Interior and Exterior) / Crash Pad / Crash Pad Side Cover Replacement

  
Put on gloves to protect your hands.
  
When prying with a flat-tip screwdriver, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage.
Use a plastic panel removal tool to remove interior trim pieces to protect from marring the surface.
Take care not to bend or scratch the trim and panels.
1.
Using a screwdriver or remover, remove the crash pad side cover (A).
[LH]

[RH]

2.
Install in the reverse order of removal.
  
Replace any damaged clips.
Crash Pad Side Cover Component Location
[LH] 1. Crash pad side cover [LH] [RH] 1. Crash pad side cover [RH] ...

Main Crash Pad Assembly Component Location
1. Main crash pad assembly ...

See also:

Crankshaft Position Sensor (CKPS) Description
Crankshaft Position Sensor (CKPS) detects the crankshaft position and is one of the most important sensors of the engine control system. If there is no CKPS signal input, the engine may stop ...

Luggage Side Trim Component Location
(5Door) 1. Luggage side trim ...

Variable Charge Motion Actuator (VCMA) Inspection
1. Turn ignition switch OFF. 2. Disconnect the VCMA connector. 3. Check that the VCMA is not stuck by foreign ...

Copyright www.kifomanual.com 2014-2026