Kia Forte: Special Service Tools - Engine Mechanical System - Kia Forte TD 2014-2018 Service ManualKia Forte: Special Service Tools

Second generation YD (2014-2018) / Kia Forte TD 2014-2018 Service Manual / Engine Mechanical System / Special Service Tools

Tool (Number and name)
Illustration
Use
Crankshaft front oil seal installer
09231-2E000

Installation of the front oil seal
Valve stem seal installer
(09222-2E000)

Installation of the valve stem oil seal
Valve spring compressor
(09222-3K000)
(09222-3K100)

Removal and installation of the intake or exhaust valve
A : 09222-3K000 (compressor)
B : 09222-3K100 (holder)
Crankshaft rear oil seal installer
(09214-2E000)
(09231-H1100)

Installation of the rear oil seal
A : 09214-2E000 (installer)
B : 09231-H1100 (handle)
Ring gear stopper
(09231-2B100)

Holding ring gear so that engine doesn't turn/move after the starter is removed
Ring gear stopper
(09231-3D100)

Holding ring gear so that engine doesn't turn/move after the service cover is removed
Torque angle adapter
(09221-4A000)

Installation of bolts & nuts needing an angular method of adjustment
Oil pan remover
(09215-3C000)

Х
Removal of oil pan
Х
Must use this tool to separate the oil pan from the lower crankcase assembly without damage to the sealing surfaces
Tensioner stopper pin
(09240-2E100)

Holding compressed piston of tensioner
Oil filter wrench
(09263-2E000)

Removal and installation of oil filter

Specifications
Description Specifications Limit General Type In-line, DOHC   Number of cylinders 4   ...

Compression Pressure Inspection
   If the there is lack of power, excessive oil consumption or poor fuel economy, measure the compression pressure. ...

See also:

Purge Control Solenoid Valve (PCSV) Specification
Item Specification Coil Resistance (Ω) 22.0 ~ 26.0 [20∞C(68∞F)] ...

In-car Sensor (DATC only) Description
An in-car air temperature sensor is located in the crash pad lower panel. The sensor contains a thermistor which measures the temperature of the inside. The signal decided by the resistance ...

Front Fog Lamps Removal
1. Disconnect the negative(-) battery terminal. 2. Remove the front bumper cover. (Refer to Body - "Front Bumper Cover") ...

Copyright © www.kifomanual.com 2014-2024