Kia Forte: Turn Signal Lamp
Second generation YD (2014-2018) / Kia Forte TD 2014-2018 Service Manual / Body Electrical System / Lighting System / Turn Signal Lamp
Removal
| 1. |
Remove the outside rear view mirror.
(Refer to Body - "Outside Rear View Mirror")
|
Installation
| 1. |
Install the outside rear view mirror.
(Refer to Body - "Outside Rear View Mirror")
|
Rear Combination Lamp Installation
1.
Install the rear combination lamp (Inside) assembly.
2.
Install the rear combination lamp (outside) assembly.
...
Troubleshooting
1.
The lamp switch inputs can be checked using the GDS.
2.
To check the input value of lamp switch, select option "Body Control
Module ...
See also:
Inspection
1.
After disconnecting the vapor hose from the PCV valve, remove
the PCV valve.
2.
Reconnect the PCV valve to the vapor hose.
...
Drive Belt Tensioner Inspection
Check the belt tensioner for excessive foreign substances, crack, damage
or sticking of pivot shaft. Replace if necessary. ...
Special driving conditions
Hazardous driving conditions
When hazardous driving conditions are encountered such as water, snow, ice, mud,
sand, or similar hazards, follow these suggestions:
Drive cautiously and allow extra ...
Copyright © www.kifomanual.com 2014-2025