Kia Forte: Door Scuff Trim Replacement
| •
|
Put on gloves to protect your hands.
|
|
| •
|
When prying with a flat-tip screwdriver, wrap it with
protective tape, and apply protective tape around the related
parts, to prevent damage.
|
| •
|
Use a plastic panel removal tool to remove interior trim
pieces to protect from marring the surface.
|
| •
|
Take care not to bend or scratch the trim and panels.
|
|
|
1. |
Using a screwdriver or remover, remove the front door scuff tirm
(A).
[Front]
|
|
2. |
Remove the rear seat cushion assembly.
(Refer to Rear Seat - "Rear Seat Assembly")
|
|
3. |
After loosening the mounting screws, then remove the rear door
scuff tirm (A).
[Rear]
|
|
4. |
Install in the reverse order of removal.
|
• |
Replace any damaged clips.
|
|
|
(2Door)
| •
|
Put on gloves to protect your hands.
|
|
| •
|
When prying with a flat-tip screwdriver, wrap it with
protective tape, and apply protective tape around the related
parts, to prevent damage.
|
| •
|
Use a plastic panel removal tool to remove interior trim
pieces to protect from marring the surface.
|
| •
|
Take care not to bend or scratch the trim and panels.
|
|
|
1. |
Using a screwdriver or remover, remove the front door scuff tirm
(A).
[Front]
|
|
2. |
Install in the reverse order of removal.
|
• |
Replace any damaged clips.
|
|
|
(4Door, 5Door)
1. Front door scuff trim
2. Rear door scuff trim
(2Door)
1. Front door scuff trim
...
See also:
Engine Control Module (ECM) Installation
When replacing the ECM, the vehicle equipped with the immobilizer
must be performed procedure as below.
...
Description
The Evaporative Emission Control System prevents fuel vapor stored in
fuel tank from vaporizing into the atmosphere. When the fuel evaporates in the
fuel tank, the vapor passes through vent h ...
Replacement
•
Be careful not to damage the fender and body.
...
Door Scuff Trim Component Location
Cowl Side Trim Component Location