Kia Forte: Cowl Side Trim Replacement

Second generation YD (2014-2018) / Kia Forte TD 2014-2018 Service Manual / Body (Interior and Exterior) / Interior Trim / Cowl Side Trim Replacement

•	Put on gloves to protect your hands.

•	When prying with a flat-tip screwdriver, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage.

•	Use a plastic panel removal tool to remove interior trim pieces to protect from marring the surface.

•	Take care not to bend or scratch the trim and panels.

1.	Remove the front door scuff trim. (Refer to Interior Trim - "Door Scuff Trim")

2.	Remove the hood latch release handle. (Refer to Hood - "Hood Latch Release Handle")

3.	Slighty remove the front door body side weatherstrip.

4.	Using a screwdriver or remover, remove the cowl side trim (A).

5.

Install in the reverse order of removal.

•	Replace any damaged clips.

Cowl Side Trim Component Location

1. Cowl side trim ...

Front Pillar Trim Component Location

1. Front pillar trim ...

See also:

Cowl Cross Bar Assembly Replacement
• Put on gloves to protect your hands. ...

Cooling Fan Description
[Air conditioning type] The cooling fan operates in 2 stages (HIGH/LOW). The engine control module (ECM) controls the cooling fan according to the coolant temperature, vehicle speed and A ...

Front Strut Assembly Disassembly
1. Using the special tool (09546-26000), compress the coil spring (A). Tightening torque: 58.3 ~ 73.5N.m (6.0 ~ 7.5kgf.m, 43.4 ~ 54.2 ...

Categories

Copyright � www.kifomanual.com 2014-2026