Kia Forte: Rear Back Armrest Replacement
| •
|
Put on gloves to protect your hands.
|
|
| •
|
When prying with a flat-tip screwdriver, wrap it with
protective tape, and apply protective tape around the related
parts, to prevent damage.
|
| •
|
Use a plastic panel removal tool to remove interior trim
pieces to protect from marring the surface.
|
| •
|
Take care not to bend or scratch the trim and panels.
|
|
|
1. |
Fold the rear seat back assembly [LH].
|
|
2. |
Remove the rear back armrest cap (A).
|
|
3. |
After loosening the mounting bolt, then remove the rear back armerst
(B).
|
|
4. |
Install in the reverse order of removal.
|
• |
Replace any damaged clips.
|
|
|
(4Door, 2Door)
1. Rear seat latch assembly
(5Door)
1. Rear seat latch
...
See also:
Camshaft Position Sensor (CMPS) Removal
•
DON’T remove the camshaft position sensor during engine
running or right after eng ...
Intake Actuator Inspection
1.
Turn the ignition switch OFF.
2.
Disconnect the intake actuator connector.
3.
Verify that the intake actuato ...
Components Location
1. Purge Control Solenoid Valve (PCSV)
2. Vapor line
3. ORVR valve
4. Fuel tank air filter
5. Canister Close Valve (CCV)
6. Canister
7. Fuel Tank Pressure Sensor ( ...
Rear Back Armrest Component Location
Rear Seat Latch Component Location