Kia Forte: Audio Unit Installation - Audio - Body Electrical System - Kia Forte TD 2014-2018 Service ManualKia Forte: Audio Unit Installation

Second generation YD (2014-2018) / Kia Forte TD 2014-2018 Service Manual / Body Electrical System / Audio / Audio Unit Installation

1.
Connect the audio unit connectors and cables.
2.
Install the audio unit.
3.
Install the center fascia panel.
4.
Install the center fascia garnish.
5.
Connect the negative (-) battery terminal.
  
Make sure the audio head unit connectors are plugged in properly and the antenna cable is connected properly.
Audio Unit Removal
   • When prying with a flat-tip screwdriver, wrap it with protective tape, and apply prote ...

Speakers Inspection
1. Troubleshooting for Speaker (1) Basic inspection of speaker Inspect the sound from speaker after verifying that the s ...

See also:

Component Replacement After Deployment
   Before doing any SRS repairs, use the GDS Pro to check for DTCs. Refer to the Diagnostic Trouble Code list for repairing ...

Rear Torsion Beam Axle Inspection
1. Check the hub for cracks and the splines for wear. 2. Check the rear axle carrier for cracks. ...

Components
(4Door, 5Door) 1. Front pillar trim 2. Center pillar lower trim 3. Center pillar upper trim 4. Rear pillar trim 5. Rear wheel house trim 6. Cowl side trim ...

Copyright © www.kifomanual.com 2014-2024