1. |
Reassemble the steering wheel remote control switch after connecting
the connector.
|
2. |
Reassemble the driver airbag module.
|
In-car Sensor (DATC only) Inspection
1.
Turn the ignition switch ON.
2.
Blow air with changing temperature into the in-car sensor air
inlet. Measure the sensor resistance betwe ...
Drive plate Components
1. Piston ring
2. Snap ring
3. Piston pin
4. Piston
5. Connecting rod
6. Connecting rod upper bearing
7. Connecting rod lower be ...
Relay Box (Passenger Compartment) Installation
1.
Install the smart junction box.
2.
Install the crash pad lower panel.
3.
Check that all system operates norm ...