1. |
Remove the rear roof trim.
(Refer to Body - "Roof Trim Assembly")
|
2. |
Disconnect roof antenna connectors (A).
|
3. |
Remove the roof antenna after removing a nut (A).
|
Fuel Tank Pressure Sensor (FTPS) Removal
1.
Turn the ignition switch OFF and disconnect the battery negative
(-) cable.
2.
Remove the rear seat.
(Refer to Body - “Rear Seat ...
Rear Torsion Beam Axle Replacement
1.
Loosen the wheel nuts slightly. Raise the vehicle, and make sure
it is securely supported.
2.
Remove the front wheel and tire (A) from f ...