1. |
Remove the negative (-) battery terminal.
|
2. |
Remove the driver seat in the car.
(Refer to Body - "Front Seat Assembly")
|
3. |
Remove the IMS module (A) after loosen the screws.
|
4. |
Disconnect the connectors (B) from the IMS module.
|
Diagnosis procedure by using diagnostic device
As manual for diagnosis methods by using diagnosis device, the main contents
are as follows:
1.
Connect self-diagnosis connector(16pins) located in the lower
of driv ...
Inspection
Rear Brake Disc Thickness Check
1.
Check the brake pads for wear and fade.
2.
Check the brake disc for damage and cracks.
...
Output Speed Sensor Description
The output speed sensor is a vital unit that measures the rate of rotation
of the transaxle's turbine shaft and output shaft, and delivers the readings
to the Transaxle Control Module(TCM ...