Kia Forte: IMS Power Seat Control Installation - IMS (Integrated Memory) - Body Electrical System - Kia Forte TD 2014-2018 Service ManualKia Forte: IMS Power Seat Control Installation

Second generation YD (2014-2018) / Kia Forte TD 2014-2018 Service Manual / Body Electrical System / IMS (Integrated Memory) / IMS Power Seat Control Installation

  
-
Make sure that the IMS control switch connectors and related connectors are plugged in properly.
-
Check the IMS control switch operates normally.
1.
Connect the connectors and reassemble the IMS control switch.
2.
Reassemble the front door trim.
IMS Power Seat Control Removal
1. Disconnect the negative (-) battery terminal. 2. Remove the front door trim. (Refer to Body - "Front Door Trim") ...

IMS Control Switch Circuit diagram
...

See also:

Tire Installation
1. Apply tire soap or lubrication to the top and bottom tire beads. 2. To fit the bottom bead, position the valve at the 5 o’clock posit ...

Rear Body
* These dimensions indicated in this figure are actual-measurement dimensions. [ Unit : mm (inch) ] Side outer p ...

Shift Cable Adjustment
1. Place the shift lever in the interior, and the transmission manual control lever, to the N position. 2. Connect the shift lever (B) in ...

Copyright © www.kifomanual.com 2014-2024