Kia Forte: Sunvisor Replacement
| •
|
Put on gloves to protect your hands.
|
|
| •
|
When prying with a flat-tip screwdriver, wrap it with
protective tape, and apply protective tape around the related
parts, to prevent damage.
|
| •
|
Use a plastic panel removal tool to remove interior trim
pieces to protect from marring the surface.
|
| •
|
Take care not to bend or scratch the trim and panels.
|
|
|
1. |
Loosen the mounting screws, then remove the sunvisor (A) and retainer
(B).
|
|
2. |
Install in the reverse order of removal.
|
• |
Replace any damaged clips.
|
|
|
1. Sunvisor
2. Retainer
...
See also:
ETC (Electronic Throttle Control) System Inspection
Throttle Position Sensor (TPS)
1.
Connect the GDS on the Data Link Connector (DLC).
2.
Start the engine and measure the output voltage of TP ...
Inspection
[EVAP. Leakage Test]
1.
Select "Evap. Leakage Test".
2.
Proceed with the test according to the screen introductio ...
Inpection
1.
Measure a resistance of NTC and Heated pad.
A.
NTC resistance - 10.0 kΩ ± 10% (25°C)
B.
H ...
Sunvisor Component Location
Assist Handle Component Location